Products
-
DYCZ-24DN Special Wedge Device
Special Wedge Frame
Cat.No.:412-4404
This Special Wedge Frame is for DYCZ-24DN system. Two pieces of special wedge frames as a standard accessory packed in our system.
DYCZ – 24DN is a mini dual vertical electrophoresis applicable for SDS-PAGE and native-PAGE. This special wedge frame can firmly fix the gel room and avoid leakage.
A vertical gel method is slightly more complex than its horizontal counterpart. A vertical system utilizes a discontinuous buffer system, where the top chamber contains the cathode and the bottom chamber contains the anode. A thin gel (less than 2 mm) is poured between two glass plates and mounted so that the bottom of the gel is submerged in buffer in one chamber and the top is submerged in buffer in another chamber. When current is applied, a small amount of buffer migrates through the gel from the top chamber to the bottom chamber.
-
DYCZ-24DN Gel Casting Device
Gel Casting Device
Cat.No.:412-4406
This Gel Casting Device is for DYCZ-24DN system.
Gel electrophoresis can be conducted in either a horizontal or vertical orientation. Vertical gels are generally composed of an acrylamide matrix. Pore sizes of these gels depend on the concentration of chemical components: agarose gel pores (100 to 500 nm diameter) are larger and less uniform compared to that of acrylamide gelpores (10 to 200 nm in diameter). Comparatively, DNA and RNA molecules are larger than a linear strand of protein, which are often denatured prior to, or during this process, making them easier to analyze. Thus, proteins are run on acrylamide gels (vertically).DYCZ – 24DN is a mini dual vertical electrophoresis applicable for SDS-PAGE and native-PAGE. It has the function of casting gels in original position with our special designed gel casting device.
-
DYCP-31DN Gel Casting Device
Gel Casting Device
Cat. No.: 143-3146
This gel casting device is for DYCP-31DN system.
Gel electrophoresis can be conducted in either a horizontal or vertical orientation. Horizontal gels are typically composed of an agarose matrix. Pore sizes of these gels depend on the concentration of chemical components: agarose gel pores (100 to 500 nm diameter) are larger and less uniform compared to that of acrylamide gelpores (10 to 200 nm in diameter). Comparatively, DNA and RNA molecules are larger than a linear strand of protein, which are often denatured prior to, or during this process, making them easier to analyze. Thus, DNA and RNA molecules are more often run on agarose gels (horizontally).Our DYCP-31DN system is a horizontal electrophoresis system. This molded gel casting device can make 4 different sizes of gels by different gel trays.
-
Western Blotting Transfer System DYCZ-TRANS2
DYCZ – TRANS2 can rapidly transfer the small size gels. The buffer tank and lid combine to fully enclose the inner chamber during electrophoresis. The gel and membrane sandwich is held together between two foam pads and filter paper sheets, and placed into the tank within a gel holder cassette. Cooling systems consist of an in ice block, a sealed ice unit. Strong electric field arising with the electrodes placed 4 cm apart can ensure the effective of native protein transfer.
-
Protein Electrophoresis Equipment DYCZ-MINI2
DYCZ-MINI2 is a 2-gel vertical electrophoresis system, includes electrode assembly, tank, lid with power cables, mini cell buffer dam. It can run 1-2 small size PAGE gel electrophoresis gels. The product has advanced structure and delicate appearance design to ensure the ideal experiment effect from gel casting to gel running.
-
Wholesale Vertical Electrophoresis System DYCZ-23A
DYCZ-23A is a mini single slab vertical electrophoresis cell used for separating, purifying and preparing protein charged particles. It is a mini single plate structure product. It fits for the experiment with small quantity of samples. This mini size transparent electrophoresis tank is very economical and easy to use.
-
Wholesale Vertical Electrophoresis System DYCZ-22A
DYCZ-22A is a single slab vertical electrophoresis cell used for separating, purifying and preparing protein charged particles. It is a single plate structure product. This vertical electrophoresis tank is very economical and easy to use.
-
Wholesale Tube Gel Electrophoresis System DYCZ-27B
DYCZ-27B tube gel electrophoresis cell is used together with electrophoresis power supply, it is designed for years of reproducible and rigorous use and is suitable for performing the first phase of 2-D electrophoresis (Isoelectric Focusing – IEF), allowing 12 tube gels to be run at any one time. 70 mm high middle ring of the electrophoresis cell and the gels differ in the length of the tubes that are 90 mm or 170 mm long, allow a high degree of versatility in separation desired. DYCZ-27B tube gel electrophoresis system is easy to assemble and use.
-
Turnkey Solution for Gel Electrophoresis Products
The horizontal electrophoresis apparatus by Beijing Liuyi Biotechnology was designed with safety and convenience in mind. The injection-molded transparent chamber is made from high quality polycarbonate, making it exquisite, durable and leak-proof while the lid fits securely in place and can easily be removed. All the electrophoresis units feature adjustable leveling feet, recessed electrical wires, and a safety stop that prevents the gel from running when the cover is not securely fitted.
-
4 Gels Vertical Electrophoresis Cell DYCZ-25E
DYCZ-25E is a 4 gels vertical electrophoresis system. Its two main body can carry 1-4 pieces of gel. The glass plate is optimized design, greatly reduce the breakage possibility. The rubber chamber is installed in the electrophoresis core subject directly, and a set of two pieces of glass plate is installed respectively. Operation requirement is very simple and accurate limit installation design, make high-end product simplification. Tank is beautiful and transparent, the running status can be shown clearly.
-
Modular Dual Vertical System DYCZ – 24EN
DYCZ-24EN is used for SDS-PAGE, Native PAGE electrophoresis and the second dimension of 2-D electrophoresis, which is a delicate, simple and easy to use system. It has the function of “casting gel in original position”. It is manufactured from high transparent poly carbonate with platinum electrodes. Its seamless and injection-molded transparent base prevents leakage and breakage. It can run two gels at once and save buffer solution. Its power source will be switched off when user opens the lid. This special lid design avoids making mistakes and is very safe for user.
-
DYCZ-40D Electrode Assembly
Cat.No.: 121-4041
The electrode assembly is matched with DYCZ-24DN or DYCZ-40D tank. Used to transfer the protein molecule from the gel to membrane like nitrocellulose membrane in the Western Blot experiment.
Electrode assembly is the important part of DYCZ-40D,which has the capacity to hold two gel holder cassettes for electrophoresis transfer between the parallel electrodes only 4.5 cm apart. The driving force for blotting applications is the voltage applied over the distance between the electrodes. This short 4.5 cm electrode distance allows generation of higher driving forces to produce efficient protein transfers. Other features of DYCZ-40D includes latches on the gel holder cassettes for easy handling purpose, supporting body for transfer (electrode assembly) comprise of red and black color parts and red and black electrodes to ensure proper orientation of the gel during the transfer, and an efficient design which simplifies insertion and removal of the gel holder cassettes from the supporting body for transfer (electrode assembly).
